|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | EPIROC C5 Diamond Core Drill Rig | Application: | Ore, Mineral And Geological Exploration Core Drilling |
|---|---|---|---|
| Drill Depth: | 800m NQ/ 1000m BQ/ 500m HQ/ 300m PQ | Hole Diameter: | BQ NQ HQ PQ |
| Core Method: | Wireline Core Drilling | Model: | C5/ CS1000 |
| High Light: | Geological Core Drill Machines,117kw Core Drill Machines,117kw Geological Exploration Drill Machines |
||
Drilling Depth 800m N-size Surface Drill Rig For Geological Exploration
Introduction
The Boyles C5/C5C surface core drilling rig is compact, yet powerful. Its compact design makes it easy to position and transport, even by helicopter. During helicopter transport, the rig is broken down into six main modules and each module is equipped with lifting points to ensure safe and effective transport. A sturdy and robust design enables continuous operation in remote locations and harsh operating environments.
Feature
Rotation unit
The rotation unit can handle BO-POrods and BW-HW casing. It consists of a hydraulic motor, a sealed gearbox,a hollow spindle and an Epiroc hydraulic chuck, and quick change chuck jaws. The rotation speed is adjustable from the control panel.
Ergonomics and safety
The rig is easy to operate using an intuitive control panel. All drilling functions can be operated from the control panel. For example, you can
make and break rods without manual intervention or being close to any
moving parts.
Specifications
| Depth Capacity | |
| B wireline | 1000m |
| N wireline | 800m |
| H wireline | 500m |
| P wireline | 300m |
| Rotation Unit | |
| Max torque | 5,393 Nm |
| Max speed | 1,300 rpm |
| Spindle (inner diameter) | 124 mm (4,9 in) |
| Mast and Feed System | |
| Feed travel | 2.0 m (6,6 ft) |
| Feed speed | Fast and slow with variable control |
| Mast dump | 0.42 m (1,4 ft) |
| Thrust | 59.6 kN (13,390 lb) |
| Pull | 107 kN (24,055 lb) |
| Drilling angle | 45 to 90 degrees |
| Rod pull length | 6.09 m (20 ft) |
| Main hoist | |
| Single line capacity | bare drum 69 kN |
| Line speed | bare drum 39.7 m/min |
| Cable size | 35 m x 16 mm |
| weight | 5000kg |
Contact Person: Mr. Liu
Tel: +8618612948866
| Factory Address:No 101 Industry Zone, Ningxiang, Changsha City, Hunan Province, Changsha, Hunan, China | |
| Sales office:#1 Building, Hanyu golden Valley, Jingshi East Road, Jinan City, Shandong province, PRC | |
| +0086-531-58190127 | |
| sale@drillrigmachine.com | |
