|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Core Drill Rig For Mineral,gas And Oil | Drilling Depth: | 2000m,1600m,1300m,1000m |
|---|---|---|---|
| Drill Diameter: | BQ,NQ,HQ PQ | Chasis Model: | Crawler Mounted Or Truck One |
| Engine Power: | 179Kw | Coring Method: | Wireline Coring |
| High Light: | Crawler Hydraulic Core Drill Rig,2000M Hydraulic Core Drill Rig,2000M hydraulic drilling machine |
||
2000M Crawler Hydraulic Core Drill Rig for Mineral,Gas,Oil Exploration Drilling
Introduction:
A drilling rig is a complex machine consisting of machines, units and mechanisms. The drilling rig is a mechanical device that drives the drilling tool to drill underground and obtain physical geological data in the development of exploration or mineral resources (including solid ore, liquid ore, gas ore, etc.). Also known as a drilling machine. The main function is to drive the drill to break the rock at the bottom of the hole, and to drill or push the drill in the hole. It can be used to drill cores, cores, cuttings, gas samples, liquid samples, etc., to explore underground geology and mineral resources.
TDC2000 full hydraulic core drilling machine is an advanced hydraulic core drilling machine based on foreign research and development, the rig is widely used in solid mineral surface coring operation engineering.
Main parameters:
| Engine model | Cummins |
| Engine power | 179KW |
| Speed | 2200Rpm |
| Drill capacity of core drill | BQ,NQ,HQ PQ 2000m,1600m,1300m,1000m |
| Rotation speed | 0-1180 Rpm |
| Rotation torque | 7000 N.m |
| Pull force | 320kn |
| Feed force | 320kn |
| Wireline pulling capacity (Single rope) |
11Kn |
| Wireline diameter | 5Mm |
| Wireline length | 2050M |
| Hoist height | 11.15M |
| Hoist adjust angel | 0-90° |
| Drilling angel | 45-90° |
| Feed stroke | 9200mm |
| Weight | 14500Kg |
| Dimension | 9420*2250*2880mm |
| Mobile mode | Crawler mounted Truck mounted |
| Mud pump | Bw250 |
Principle:
1. The lifting ring and the lifting ring seat are connected by a pin shaft, and the lifting ring seat is welded integrally with the hook rod, the barrel body and the hook body are connected by a left-hand thread, and the stopper block is used to prevent the thread from loosening. The hook body and the barrel can move up and down along the hook rod. The function of the inner and outer load springs is to make the stand up and then bounce up when drilling.
2. The engine body is filled with oil. The seat of the thrust bearing divides the oil chamber into two parts, and the seat ring is provided with an oil hole. Due to the damping effect of the oil flow, the impact vibration of the hook body during the drilling operation is absorbed, and the thread of the drill pipe joint can be prevented from being damaged.
3. The upper end of the cylinder is composed of 6 small springs and a positioning plate, and the positioning device and the frictional force between the annular contact surfaces of the lifting ring seat can prevent the rotation of the lifting ring to make the lifting ring index when the lifting of the empty elevator is lifted.
Picture Of Core Drill Equipment:
Contact Person: Mr. Liu
Tel: +8618612948866
| Factory Address:No 101 Industry Zone, Ningxiang, Changsha City, Hunan Province, Changsha, Hunan, China | |
| Sales office:#1 Building, Hanyu golden Valley, Jingshi East Road, Jinan City, Shandong province, PRC | |
| +0086-531-58190127 | |
| sale@drillrigmachine.com | |
