Payment & Shipping Terms:
|Molecular Weight (ten Thousand):||Molecular Weight||Product:||Hydrolyzed Polyacrylamide PHPA For Drilling Anionic PAM Drilling Mud Chemical|
|Molecular Weight:||6-22 Million Minimum||Purity:||90%|
|Appearance:||White Granule/power||Degree Of Hydrolysis（%）:||15-80|
drilling rig equipment,
underground drilling equipment
Hydrolyzed polyacrylamide PHPA for Drilling Anionic PAM Drilling mud chemical
1. Easy to dissolve, dissolve time 40min.
2. It is with high performance and it can adapt to a variety of conditions.
3. The dose is small and high efficiency.
4. High molecular, molecular weight 22million.
5. High purity, without impurity.
Partially Hydrolyzed Polyacrylamide (PHPA) Powder Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type.
It is insoluble in most of the organic solvents. It generates a good flocculation and can decrease the resistance between liquids. The amide group with many substance affinity adsorption ,formation of hydrogen bonds forms bridging between the adsorbed ions in generating floc and accellration fallout.
|Appearance||white fine-sand shaped powder or grain|
|Solid Content (%)||≥90|
|Degree of hydrolysis||Low/medium/high|
|Dissolving Time (mins)||≤40|
|Note: our product can be made upon your special request.|
Packaging & Shipping
25kg/bag .kraft bag with inner plastic or accordance with the customers' demand
1. The solid product can be packed in inner plastic bags, and further in polypropylene woven bags with each bag containing 25Kg.
2. This product is hygroscopic, so it is should be sealed and stored in a dry and cool place below 35°C.
3. The solid product should be prevented from scattering on the ground because the hygroscopic powder can cause slipperiness.
1) EOR fields: The types and capability of macromolecule and super macromolecule adopted in the third oil extraction (EOR) of the oilfield:
2) Flocculant: used widely for waste water treatment; industry sewage treatment, especially the sewage with high density, bit suspending granules, such as, the sewage of steel factory, electroplating factory, it has advantages of low cost and no pollution, also can be used in paper-making etc.
3) Drilling mud chemicals: in oil field exploration and development and exploration of geology, water and coal, it is used as adhesive of well drilling mud raw materials, can improve the service life of drill bits, improve the drill speed and drilling footage, and reduce plug in replacing drill, and has prominent well slough preventing effect, and it can be used as fracturing fluid of oil fields or plugging agent of controlling profile and plugging water.
4) Papermaking industry: can be used as fining agent, residency agent, filtration aid and paper dry and wet intensity reinforcing agent in paper-making industry.
5)Slsughter, House and Dairy waster waster treatment, Private soil modification.
1. The product should be prepared for the water solution of 0.1% as concentration. It is better to use neutral and desalted water.
2. The product should be scattered evenly in the stirring water, and the dissolving can be accelerated by warming the water (below 60 °C).
3. The most economical dosage can be determined based on a preliminary test. The pH value of the water to be treated should be adjusted before the treatment.
Contact Person: Mr. Liu