|
Product Details:
|
| Model Number: | 3.5", 4", 5", 6", 8",10", 12" | Use: | Ore Mining |
|---|---|---|---|
| Advantage: | High Performance | Item: | Mining Rock Drill Tool Bit |
| Material: | Carbon Steel | Application: | Ore |
| Hole Size: | 90 Mm To 254 Mm | Processing Type: | Forging |
| High Light: | blast hole drill rig,blast hole drilling machine |
||
High Air Pressure Deep Hole Rotary Pneumatic Drilling DTH hammer without foot valve
DESCRIPTION:
The optimum range of hole size for blast hole drilling with DTH is 90 mm to 254 mm (3 ½”–10″). Smaller blast holes are generally drilled using top hammer, and larger holes generally use rotary machines.
In other applications, like foundation drilling, DTH hammers can be used with single bit in hole sizes up to.750 mm (30″). With multiple hammer units CD (Cluster drills) drill holes up to 70″ or 1778 mm.
As a rule of thumb, the smallest hole diameter a DTH hammer can drill is its nominal size. A 4 inch hammer will drill a 4 inch (102 mm) hole. The limiting factor is the outside diameter of the hammer, because, as hole diameter reduces, airflow is restricted. Maximum hole size for production drilling is the nominal hammer size plus 1 inch, so for a 4 inch hammer the maximum hole size is 5 inch (127–130 mm).
Choosing the right hammer is largely determined by hole size and type of rock formation. Ideally, the size of the hammer should match the required hole dimension as closely as possible, leaving just enough space for cuttings to evacuate the hole.
| 4" hammer size 110-135mm connection thread |
|
| Top Sub | 6.50kg |
| "O"Ring of Top Sub | 0.01kg |
| Check Valve | 0.42kg |
| Spring | 0.04kg |
| Compression Buffer | 0.04kg |
| Air Distributor | 2.20kg |
| Internal Cylinder | 2.30kg |
| Piston | 9.00kg |
| External Cylinder | 15.00kg |
| "O"Ring of Stop Ring | 0.01kg |
| Stop Ring | 0.20kg |
| Drive Chuck | 3.50kg |
| Drill Bit | |
MAIN FEATURES:
1.It works with valve-free gas distribution, so it can distribute gas reliably.
2.The piston is simple in construction and is not easily damaged.
3.Fast drilling speed, low gas consumption and low fuel consumption.
4.Less components used, the structure is simple, and the each parts are hardened, so the working life is long.The convenient maintenance with less breakdown.
5.The joint and the card sleeve are connected with the outer cylinder by a multi-start thread, which is easy to disassemble.
| 6" hammer size 155-190mm connection thread |
|
| Top Sub | 20.00kg |
| "O"Ring of Top Sub | 0.02kg |
| Check Valve | 1.00kg |
| Spring | 0.10kg |
| Compression Buffer | 0.10kg |
| Air Distributor | 6.00kg |
| Internal Cylinder | 5.00kg |
| Piston | 23.50kg |
| External Cylinder | 31.00kg |
| "O"Ring of Stop Ring | 0.02kg |
| Stop Ring | 0.60kg |
| Drive Chuck | 5.40kg |
| Drill Bit | |
According to your requirement, the top sub can be made into two spanners, and put protection buttons.An air controlling hole can be drilled on the check valve to provide more efficiency cuttings discharge.
If you are interested in our products, feel free to contact us.
Sinotechdrill International Co., Ltd
Add: A3-1 building, Hanyu Gold Valley, High-tech Zone
North Road, Jinan City, Shandong Province, China
Tel: 0086-531-58190127
Contact Person: Mr. Liu
Tel: 0086-18612948866
| Factory Address:No 101 Industry Zone, Ningxiang, Changsha City, Hunan Province, Changsha, Hunan, China | |
| Sales office:#1 Building, Hanyu golden Valley, Jingshi East Road, Jinan City, Shandong province, PRC | |
| +0086-531-58190127 | |
| sale@drillrigmachine.com | |
